diy utility sink makeover #diy #laundry
diy utility sink makeover #diy #laundry

At the start of the month, we developed the laundry room layout, but could not think what to do to your utility sink. We knew we only had to cover that nasty little thing but did not understand how! Here’s the story of how we made this trendy surround for our usefulness sink makeover

We toyed with a couple different ideas initially, possibly cloth, maybe creating a makeshift cabinet from a leftover plywood…but nothing looked quite perfect. We continued work on the laundry area, leaving that damn utility sink till the conclusion.

Fortunately, Vicki awakened at the middle of the evening and developed a plan! So rather than trying to figure out something as we moved along, we had a definite plan which would work flawlessly with this distance! To make your own utility sink encircle just follow the tutorial under!

diy utility sink makeover #diy #laundry
diy utility sink makeover #diy #laundry

Here’s What you may need:

  • 1″x 6″ plank (just one for front counter encircle )
  • Nail gun and claws
  • Kreg Jig
  • Stain
  • Sealant
  • Spray Paint
  • Jigsaw

You first have to plan. I didn’t have to plan both of these sides. We made the folding counter using a waterfall side which would develop into the sink too, so all I wanted was front planks.

Secondly, make your shirt. We put a 1″ x 6″ plank across across the whole front, reaching the surface of the sink so as to draw where we’d have to cut to maneuver around the corners of the sink. (This is only needed when you’ve rounded corners like we’d ) My father laid on the floor and drew the lines since I kept all right and set up.

We then clamped down this board and utilized our jigsaw to cut the bit so that the board would suit right across the corners. We then measured from the wall into front board we simply cut and made some 1″x4″ boards to the sides.

Then we attached the two side planks for the counter into front board with our convenient kreg jig to maintain them closely together. You are able to observe the way the kreg holes are up on peak of this image, that’s where we combined the side planks to front countertop.

Then to join everything and maintain your makeshift countertop we created a cleat system! 1 cleat was placed on the wall at the trunk to maintain the next cleat across the side. The negative cleat ran the whole length of the side plank to the countertop. But that is not all! We had to attach a third plank to return in front for all those front boards to attach to! It was essentially a means to hold up everything and collectively and into the walls.

(You can view all this from the images ). Yet on one of those rear walls there wasn’t a stud therefore we utilized a few screws and anchors to attach into the drywall.

And that was ! It had been much simpler than a few of our other programs, and quite pretty too! We ended it up with exactly the same blot as the fold counter and a few sealant (that shields against water) then painted the silver bottoms of this utility sink using this spray paint!

And Voila! My brand new utility sink was made! It can sound confusing when describing it, but it’s exceptionally simple.

I just love the way my sink turned outside, and I could honestly state that a utility sink appears trendy! And because of this minimum quantity of money and time! The boards likely cost me about $10 or less, and that’s I needed to purchase for this undertaking. How awesome is that?! In case you have any queries, do not be afraid to ask. And if you enjoyed this job be certain that you take a look at the entire Laundry Room Makeover!

UPDATE:
We’ve had multiple questions regarding how to make this exact same appearance if your sink is not with a wall. If you do not have these choices, you would have to make some sort of internal frame. The same as creating an inner box beneath the boards. You can anchor that frame to the rear wall, however you would have to be certain that your corners and bottom were sturdy by producing that box. You can do this together with your own nail gun OR that the kreg jig — way!